Porsche, BMW, MERCEDES, MINI COOPER, accessories, apparel,
GIFTS, WATCHES, TENAX, METRIC, BOLTS, fasteners, Turbosmart, boost controllers, waste gates, bov, blow off valves


Toe Hooks, Tie Downs & Camera Mount

toehooks
Folding Race Hook - Screw Type - PorscheFolding Race Hook - Screw Type - Porsche
Folding Race Hook - Screw Type - Porsche
These stainless steel folding race hooks install in minutes on any Porsche with factory screw type removable tow hooks. Unlike the aluminum units on the market that are usually advertised as "for decorative purposes only", these stainless steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment. These pulls have a 2" opening as required by most organized race events and screw directly into the factory bumper pull location. Each hook comes with a rubber bumper to be applied on the back side to insure your bumper cover will never get scratched from hook contact. Keep the corner workers and track officials happy by installing a set of hooks that are both highly visible and highly functional.

Fits the front of 964/993/996/997/Boxster/Cayman/944T/968 and the rear of 964/993 /964/993/996/997/ and 911's with factory screw in receiver. Note: The threads on this screw match the special factory Porsche thread.
Additional Photo


GoPro Camera-Tow Hook Mount GoPro Camera-Tow Hook Mount
GoPro Camera-Tow Hook Mount
In today’s racing and track events, cameras are everywhere. They have become a very valuable learning tool for you to get the most out of your track experience. One of the most exciting views you can capture is at bumper level. It gives you the true sensation of speed, especially when you are dicing in and out of traffic. Many people use(or did use) suction cup mounts to achieve this perspective. The issues with these are simple, they destroy paint, they fall off, and are gradually becoming banned from events do to the “Flying Debris” factor. Rennline’s camera mount eliminates all of these issues. It mounts directly to your Rennline folding tow hook, giving you the ultimate vantage point you require without effecting the functionality of the hook. Machined from billet aluminum and equipped with standard Go-Pro style attachment point. Note: GoPro Camera, Camera Case, Tow Hook, and thumb screw not included. This unit is designed to work with the newer style folding tow hook which uses one pivot bolt rather than two, to fasten the tow loop to the screw. Some grinding may be required if using the old style folding tow hook. Fits all Rennline Folding Tow Hooks.

Front Tie Down HooksFront Tie Down Hooks
Front Tie Down Hooks
Securing a 997/996/Boxster or Cayman to a trailer is next to impossible without the use of wheel straps that are just about guaranteed to destroy your wheels in time. Save those expensive wheels with a set of inexpensive tie down hooks. These hooks have been specifically engineered to bolt to the front of your car without any modification or removal of any factory torqued bolts. Another great feature of these hooks are that we have incorporated a much needed jack pad that will allow you to easily lift the front of your car without the worry of damaging your rocker panel or plastic under trays. Hooks are constructed of steel and powder coated red. Each kit comes with (2) front hooks and all hardware needed for a 5 minute installation.

Rear Tie Down HooksRear Tie Down Hooks
Rear Tie Down Hooks
Securing a Boxster or Cayman to a trailer is next to impossible without the use of wheel straps that are just about guaranteed to destroy your wheels in time. Save those expensive wheels with a set of inexpensive tie down hooks from Rennline. These hooks have been specifically engineered to bolt to the rear of your 986/987 and come with any necessary hardware and installation instructions. Hooks are constructed of steel and powder coated red. Each kit comes with (2) rear hooks.

Porsche Front and Rear Tie Down SetPorsche Front and Rear Tie Down Set
Porsche Front and Rear Tie Down Set
Securing a 997/996/Boxster or Cayman to a trailer is next to impossible without the use of wheel straps that are just about guaranteed to destroy your wheels in time. Save those expensive wheels with a set of inexpensive tie down hooks. These hooks have been specifically engineered to bolt to the front and rear of your car without any modification or removal of any factory torqued bolts. Another great feature of the front hooks have incorporated a much needed jack pad that will allow you to easily lift the front of your car without the worry of damaging your rocker panel or plastic under trays. Hooks are constructed of steel and powder coated red. Each kit comes with (2) front hooks (2) rear 66° hooks and all hardware needed for a 5 minute installation.

Porsche Tow Hook and Tie Down SetsPorsche Tow Hook and Tie Down Sets
Porsche Tow Hook and Tie Down Sets
These tie-down brackets are made of steel and powder coated red and are available in four variations, straight, 90°, 66°, and 45° to allow you to install these brackets in many different locations based on your specific needs. Mounting hole measures 16.5mm. This is the same dimension as most shock mount bolts and several other suspension components.

The 66° tie downs are designed specifically for 996/997/Cayman and Boxsters with upgraded rear sway bars. GT2 and GT3 cars will also use the 66° tie down

Note: These come in sets of 2

Porsche 996 Rear Racing Tow HookPorsche 996 Rear Racing Tow Hook
Porsche 996 Racing Tow Hook - Rear

If your are "tracking" your 996, these hooks are required. Rear. Uses factory rear towing point. Includes installation hardware.




ecommerce provided by Yahoo! Small Business



Security Verified