Porsche, BMW, MERCEDES, MINI COOPER, accessories, apparel,
GIFTS, WATCHES, TENAX, METRIC, BOLTS, fasteners, Turbosmart, boost controllers, waste gates, bov, blow off valves




Cayenne Drive Shafts



Porsche Cayenne Drive Shaft - Rebuilt
Porsche Cayenne Drive Shaft - Rebuilt

Porsche Cayenne Drive Shaft - Rebuilt

Fits: Cayenne, Cayenne S & Cayenne Turbo 2004-2009

Replace your failure prone factory Porsche Drive Shaft with our updated , warranted & dynamically balanced Rebuilt Drive Shafts. Utilizing a beefier, more robust bearings fabricated in Germany, our rebuilds are designed to withstand the test of time. Why spend upwards of $650 on a new Drive Shaft only to risk another premature failure? This Rebuild is the simple choice!



** IMPORTANT CORE RETURN POLICY - PLEASE READ

DRIVE SHAFTS CANNOT BE DISASSEMBLED AT ANY TIME. EVEN IF A DISASSEMBLED DRIVE SHAFT IS REASSEMBLED THE CORE VALUE WILL BE VOIDED AND YOU WILL NOT RECEIVE YOUR CORE REFUND

A Core deposit is required on rebuilt parts to encourage you to return your original old part so that it can be rebuilt. Core deposits on some parts are very high because they are irreplaceable - if these cores are not returned, there may no longer be any available for rebuild in the future. Cores returned for credit must be accompanied by a copy of your invoice, and it must be exactly the same part as the one you received, complete and assembled, empty of fluids and reasonably clean. All cores must be free of any physical or accident damage, modifications or any other damage outside of normal wear-and-tear that may deem the core unable to rebuild. Any unacceptable core returned to Eagle Day will not be credited, nor will any shipping costs both inbound and outbound.

V-253807$389.00
Core Return Option: 
Cayenne Drive Shaft Clamping Bearing Support Mount
Cayenne Drive Shaft Clamping Bearing Support Mount

Cayenne Drive Shaft Clamping Bearing Support Mount
This innovative Drive Shaft Clamping Center Support (DSCCS) is the only true permanent fix to premature bearing support failures. This Patent-Pending device was developed over the course of 2 years to create what is now the end-all solution to failing Bearing Supports. The DSCCS is the ONLY device that can be installed without removing the Drive Shaft from the vehicle or without requiring the disassembly of the Drive Shaft. Why is this so important?


1) By not having to disassemble the Drive Shaft means that NO re-balancing of the shaft is required. All other methods of Bearing Support replacement require this expensive and lengthy procedure. Failure to balance the once disassembled Drive Shaft would result in major vibrations.


2) The DSCCS installs easily to your Drive Shaft, using basic household tools, in less than an hour. This is a Do-it-Yourself repair that will save you very costly repair bills and unnecessary time down. Should you choose to have a professional install it, the labor times will be much less than Drive Shaft replacement or any other method of repair. The cause of the premature Drive Shaft Support failure is a direct result of too much continuous stress imposed upon the rubber in the mount. This is more the product of the Drive Shaft design than the quality of the rubber material in the mount. Unfortunately, by merely replacing the Bearing Support with another similar rubber mount you can expect much of the same results experienced with the factory rubber mount.


There is only One certain and definite fix.


The DSCCS for the Porsche Cayenne [2004-2011} takes a completely different approach in solving this, all too common, problem. Getting away from the proven failure-prone solid rubber vibration dampener, the DSCCS instead uses multiple, hollow Silicone Pods. This design is much better equipped to withstand the constant compressing and stretching forces generated while in use. The silicone material also does a much better job of handling the heat and atmospheric conditions located under your vehicle. Even better, although we have over two years of use on our test vehicle and the DSCCS is still functioning flawlessly, in the rare event that any of the Pods on the DSCCS fail, they are very easily replaced in minutes.


Key Benefits

Permanently repairs the notorious bearing support
DIY installation - typically in under one hour
No need to remove or disassemble your current Drive Shaft
No need to re-balance your Drive Shaft
No need to send in your faulty Drive Shaft
No core charges
Lightweight
Patent-Pending design
Will pay for itself in labor & shipping costs


*Warranty void if front flex disc is not replaced when the Drive Shaft Clamping Bearing Support Mount is installed.


Fitment:

Cayenne V6 3.2 2004 - 2007 GAS 3200 FI
Cayenne V6 3.6 2008 - 2009 GAS 3600 FI
Cayenne V8 3.6 2010 - 2011 GAS 3600 FI
Cayenne S V8 4.5 2003 - 2007 GAS 4450 FI
Cayenne S V8 4.8 2008 - 2011 GAS 4800 FI
Cayenne Turbo V8 4.5 2003 - 2007 GAS 4450 FI
Cayenne Turbo V8 4.8 2008 - 2011 GAS 4800 FI




V-95542102015EPS$479.00



ecommerce provided by Yahoo! Small Business



Security Verified